Object Tracking | 689
Figure 31-11. Command Example: show track resolution
Figure 31-12. Command Example: show track vrf
• show running-config track [object-id]
Use the
show running-config track command to display the tracking configuration of a specified object
or all objects that are currently configured on the router.
Figure 31-13. Command Example: show running-config track
FTOS#show track resolution
IP Route Resolution
ISIS 1
OSPF 1
IPv6 Route Resolution
ISIS 1
OSPF 1
FTOS#show track vrf red
Track 5
IP route 192.168.0.0/24 reachability, Vrf: red
Reachability is Up (CONNECTED)
3 changes, last change 00:02:39
First-hop interface is GigabitEthernet 13/4
Tracked by:
FTOS#show running-config track
track 1 ip route 23.0.0.0/8 reachability
track 2 ipv6 route 2040::/64 metric threshold
delay down 3
delay up 5
threshold metric up 200
track 3 ipv6 route 2050::/64 reachability
track 4 interface GigabitEthernet 13/4 ip routing
track 5 ip route 192.168.0.0/24 reachability vrf red
track resolution ip route isis 20
track resolution ip route ospf 10
To Next Page
Loading...
