Digi TransPort WR31 - Ethernet Vlans Parameters

Configure network interfaces Configure Ethernet interfaces
Digi TransPort WR Routers User Guide 169
Ethernet VLANs parameters
VLANs (Virtual LANs) facilitate splitting a single physical LAN into separate Virtual LANs. This is
useful for security reasons, and also helps cut down on broadcast traffic on the LAN.
Enable VLAN support on Ethernet interfaces
This parameter enables VLAN support on the Ethernet interface.
VLAN ID
This parameter specifies the ID of the Virtual LAN. The TCP header uses the VLAN ID to identify
the destination VLAN for the packet.
Ethernet Interface
The Ethernet port that tags the outgoing packets. Packets sent from this interface have VLAN
tagging applied.
IP Address
The destination IP address. This parameter is optional. If configured, only packets destined for
this IP address have VLAN tagging applied.
Mask
The destination IP subnet mask. This parameter is optional. If configured, only packets destined
for this IP subnet mask have VLAN tagging applied.