Manage networks and connections View network interface status
Digi TransPort WR Routers User Guide 765
ISDN parameters
The ISDN parameters section contains the status information for the ISDN interface.
ISDN BRI
The status information is presented as a simple table having three or four columns as described
below:
Channel
There are three supported channels; the D-channel, B1, and B2 channels that appear in this
column. Each channel row has an associated status, protocol and (for data channels) action. The
Action column will only appear when the associated channel becomes active.
Status
The status of each channel. The status is either ON or OFF.
Protocol
The protocol in use by the channel. This should be as set up in the configuration procedure. For
D-channels, this will be LAPD. If the associated channel is not active, this entry will be blank.
Action
When the link becomes active, a button should appear in this column. The text on the button will
be Drop Link. Clicking the button deactivates the channel.
Related CLI commands
If a PPP instance has been associated with a B-channel, display the statistics for that PPP instance
using the normal pppstat command.
To Next Page
Loading...
