Hardware TransPort WR41 hardware
Digi TransPort WR Routers User Guide 59
TransPort WR41 hardware
TransPort WR41 front panel features
1 USB host connector: Connects compatible USB 2.0 client devices such as memory sticks, and
serial adapters. The total current available to power USB devices is 0.5A.
2POWER LED:
• Off: No power
• Green: TransPort device is powered
3LAN LED: Illuminates steadily when there is a network connection to the LAN port and flashes
when data is transmitted or received.
4WN LED:
• Wi-Fi models: Illuminates steady if Wi-Fi activity is present.
• Non-Wi-Fi models: Flashes to show which network mode the router is operating in:
Off: No service
1 blink: GPRS mode
2 blinks: EDGE mode
3 blinks: UMTS mode
4 blinks: HSDPA mode
5 blinks: HSUPA mode
6 blinks: LTE mode
5LINK LED: Illuminates steadily when a wireless WAN data connection has been established.
6SIM LED: Illuminates steadily when a valid SIM card is installed.
7ACT LED: Flashes to indicate that data is being transferred over the wireless WAN network.
8 SIGNAL LEDs: Indicate strength of cellular signal.
• 3 LEDs: Excellent
• 2 LEDs: Good
• 1 LED: Fair
• 0 LEDs: Poor or No signal
To Next Page
Loading...
