EasyManua.ls Logo

Digi TransPort WR31 - Signal Strength Indicators; Antenna Specifications for Wi-Fi 2.4 Ghz Modules

Digi TransPort WR31
866 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hardware Signal strength indicators
Digi TransPort WR Routers User Guide 95
Signal strength indicators
On routers equipped with W-WAN modules, there are three LEDs on the front panel that indicate
signal strength. See Signal strength indicators for a discussion of these indicators.
Antenna specifications for Wi-Fi 2.4GHz modules
The Wi-Fi 2.4GHz modules for this product obtained its complete certification by using the antenna
described here. End users in North America should use an antenna that matches these
specifications to maintain the module’s certification. You can use antennas of the same type but
operating with a lower gain.
.
Attribute Property
Frequency Range 2.4 to 2.5 GHz
Impedance 50 Ohm
VSWR 1.92 max
Return Loss -10dB max
Gain 1.8 dBi
Polarization Linear
Radiation Pattern Near omni-directional in the horizontal plane
Admitted Power 1W
Electrical
1/2
Dipole

Table of Contents

Other manuals for Digi TransPort WR31

Related product manuals