Digi TransPort WR31 - Related CLI Commands

Configure system settings Device Identity parameters
Digi TransPort WR Routers User Guide 643
Router Identity
A string of up to 20 characters that identify the router in email alert messages generated by the
event logger. This string also serves as the prompt string during a remote login. The factory
configuration uses the character sequence %s. This sequence is replaced by the serial number of
the router when the unit identity is displayed. You can use this character sequence when
creating a custom identity for the router. For example, if the serial number of the router is
012345, entering the string My_Router_%s> would show the prompt My_Router_012345>
during a remote login.
Hostname
Assigns a hostname to the local IP address of the router.
Secondary Hostname
Allows a second hostname to be assigned to a router. This is associated with the secondary IP
address.
Note Character limitations of the Description and Hostname fields should be 64 characters.
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
snmp n Name Free text field up to 64
characters
Description
snmp n Contact Free text field Contact
snmp n Location Free text field Location
cmd n Unitid Free text field Router Identity
cmd n Hostname Free text field up to 64
characters
Hostname
cmd n sec_hostname Free text field up to 64
characters
Secondary Hostname