Configure IP passthrough IP Passthrough page configuration parameters
Digi TransPort WR Routers User Guide 497
IP Passthrough page configuration parameters
In this configuration, the local PC shares the public IP addressing information with the WAN side of
the router.
Enable IP Pass-through
Enables IP passthrough mode.
Local interface
The local interface to which the local PC is connected, either an Ethernet or PPP connection.
WAN PPP interface
The PPP interface that will share its WAN address with the local PC.
Ethernet DHCP Mode
Selects the mode of operation for the passthrough functionality. The available options are
Normal/24 bit mask and Fixed IP Address/32 bit mask. The default is Normal/24 bit mask.
When Fixed IP/32 bit mask mode of operation is selected, the DHCP server provides a 32-bit
subnet mask to the client and sets the address/subnet mask for the Ethernet interface to
192.168.1.1/32.
To Next Page
Loading...
