Device administration Manage files
Digi TransPort WR Routers User Guide 812
Manage files
There are several commands and web interface pages for managing the TransPort file system.
The TransPort file system
The dir command displays a list of the files currently stored on the device. A typical file directory
includes the following files:
Once you have configured the router, you must save the chosen settings to non-volatile memory to
avoid losing them when the power is removed.
▪ Application command settings are stored in one of two CONFIG files.
▪ AT command and S register settings are stored in one file named SREGS.DAT.
Filename Description
ana.txt Pseudo file for Protocol Analyser output
config.da0 Data file containing Config.0 settings
direct File directory
eventlog.txt Pseudo file for Event Log output
fw.txt Firewall script file
fwstat.txt Firewall script status file
image Main system image
*.web File containing compressed Web pages for your model
logcodes.txt Text file containing Event Log config. info.
pwds.da0 File containing obfuscated passwords
sbios TransPort BIOS and bootloader
sregs.dat Data file containing AT command & S register settings
x3prof X.25 PAD profile parameters
To Next Page
Loading...
