Digi TransPort WR31 - Date and Time Parameters

Configure system settings Date and Time parameters
Digi TransPort WR Routers User Guide 644
Date and Time parameters
The router keeps track of calendar time using an internal real time clock (RTC) device. The router
uses this clock to time/date stamp logfiles. The date and time configuration pages allow the system
time to be set and maintained. Since maintaining an accurate system clock can be important for
routers on the Internet, NTP and SNTP services are supported and the router may be configured to
use one of these protocols for maintaining the internal system time. The router uses the 24-hour
clock.
Current system time
The current system time appears at the top of this web page.
Manually set the time h hours, m minutes s seconds, M month D day Y year
These parameters are set using the associated drop-down selection menus.
Hours
Select from the drop-down list to set the hours.
Minutes
Select from the drop-down list to set the minutes.
Seconds
Select from the drop-down list to set the seconds. This setting may have limited use due to
human reaction times.
Month
Select from the drop-down list to set the month.
Day
Select from the drop-down list to set the day.