Configure Quality of Service (QoS) DSCP Mappings parameters
Digi TransPort WR Routers User Guide 506
DSCP Mappings parameters
The Configuration > Network > QoS > DSCP Mappings page contains parameters to configure
DSCP operation. Each DSCP value must be mapped to a queue. This page sets up those mappings.
Default
Selects the default queue. When this is changed, any DSCP codes that are set to use the default
will have their queue number changed.
DSCP
A list of valid DSCP codes with an associated drop-down list box to the right.
Queue
Each of the DSCP codes in the left-hand column has a queue associated with it. To change the
value from what is shown, select the desired value from the drop-down list.
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
dscp n q 0-63
Default 4
Queue
To Next Page
Loading...
