Hardware TransPort WR41 hardware
Digi TransPort WR Routers User Guide 62
TransPort WR41 under-unit features
Reset button
The reset button allows the user to return the router to its factory default settings. It is recessed [to
avoid accidental reset], and can be accessed via a small 2.5mm hole located on the underside of the
router.
Reset the router
1 Turn the router on and wait 15 seconds for the router to complete its initialization process.
2 Press and hold the reset button gently for 5 seconds. After this time, the router will automatically
re-boot and display a pattern of alternating LEDs flashing followed by the normal boot
sequence.
CAUTION! Do not remove power from the router during this operation, as corruption of the flash
memory may occur.
Front of unit
Rear of unit
To Next Page
Loading...
