Digi TransPort WR31 - Equivalent Cross Virtual Routing Entry; Cross Virtual Routing Entry

Configure IP routing and forwarding Virtual Routing and Forwarding (VRF)
Digi TransPort WR Routers User Guide 398
Equivalent Cross Virtual Routing Entry
The Equivalent Cross Virtual Routing Entry and Cross Virtual Routing Entry objects describe the first
dimension of a cross virtual routing table, as an array of Cross Virtual Routing Entry objects sharing
a single Virtual Routing Forwarding (VRF) Entity destination.
Cross Virtual Routing Entry
Attribute name Attribute description Scheme Polling interval
Virtual Routing Entries Array of Cross Virtual Routing Entry objects
sharing a single destination
IPCore Configuration
Exported Route Targets Virtual Routing Entity (VRF) name IPCore Configuration
Attribute name Attribute description Scheme Polling interval
Outgoing Virtual Routing
Entity Identifier
Outgoing virtual routing entity Object
Identifier (OID)
IPCore Configuration
Incoming and Outgoing
Virtual Routing Tags
Incoming and outgoing virtual routing tags IPCore Configuration
Destination IP Subnet Final destination IP subnet IPCore Configuration
Next Hop IP Address Type List of the address families (IPv4, IPv6, or both) IPCore Configuration
Type Route entry type (Null, Other, Invalid, Direct,
Indirect, Static)
IPCore Configuration
Routing Protocol Type Routing protocol type (Null, Other, Local,
Network Managed, ICMP, EGP, GGP, Hello, RIP,
IS-IS, ES-IS, Cisco IGRP, BBN, SPF IGP, OSPF,
BGP, EIGRP)
IPCore Configuration
Outgoing Interface Name Address resolution entity (ARP entity) IPCore Configuration