Configure security settings System security settings
Digi TransPort WR Routers User Guide 680
System security settings
To configure system security settings, go to Configuration > Security> System.
This page is for configuring system security settings, securing USB devices, and miscellaneous
security settings.
USB Security
Disable the following USB devices
This parameter provides an option of enabling or disabling any of the following USB devices:
• All devices
• Mass storage devices
• Serial devices
• Hub devices
Allow autoexec.bat files to run from Mass Storage Devices
Enables/disables running the autoexec.bat files from the mass storage devices.
Miscellaneous system security settings
Enable “Factory Default” reset button
Enables/disables execution of a complete hardware reset.
To Next Page
Loading...
