Configure Remote Management Digi Remote Manager
Digi TransPort WR Routers User Guide 662
Digi Remote Manager
Digi Remote Manager is a hosted remote configuration and management system for managing a
large number of routers.
Digi Remote Manager provide a web-based interface that shows the configuration of selected
routers allows the configuration to be changed and also facilitates remote firmware upgrade. The
Digi Remote Manager servers also provide a data storage facility.
Using Digi Remote Manager requires setting up a Digi Remote Manager account. Applying for an
account is a straightforward procedure; the local sales representative will have details. To set up a
Digi Remote Manager account and learn more about Digi Remote Manager, go to http://
www.digi.com/products/cloud/digi-remote-manager.
Remote Manager parameters
Remote Manager parameters are configured on the Configuration > Remote Management pages.
Connection Settings
To configure Digi Remote Manager connection settings parameters, set the following values:
Enable Remote Management using a client-initiated connection
Displays the basic configuration parameters and enable the router to make the connection to
the Remote Manager server.
Server Address
The IP address or (more usually) the domain name of the Remote Manager host. This
information will be supplied when your Remote Manager account is activated.
Automatically reconnect to the server after being disconnected
The protocol for communicating with the server allows the router to detect that it is no longer
connected to the server. Enabling this setting causes the router to attempt a reconnection when
it discovers that the connection has been lost.
Reconnect after h hours m minutes s seconds
The interval to wait before attempting to reconnect to the server.
To Next Page
Loading...
