Digi TransPort WR31 - Related CLI Commands

Configure IP routing and forwarding IP Port Forwarding / Static NAT Mappings parameters
Digi TransPort WR Routers User Guide 392
Related CLI commands
Command format
Nat <entry> <parameter> <value>
Example commands
To set the IP address for entry 0 in the table to 10.1.2.10, enter the command:
nat 0 IPaddr 10.1.2.10
Entity Instance Parameter Values Equivalent web parameter
nat 0-29 minport 0-65535 External Min Port
nat 0-29 maxport 0-65535 External Max Port
nat 0-29 IPaddr Valid IP address
a.b.c.d
Forward to Internal IP Address a.b.c.d
nat 0-29 mapport 0-65535 Forward to Internal Port