Configure Remote Management Advanced remote management settings
Digi TransPort WR Routers User Guide 667
WAN Settings
Receive Interval s seconds
The time between keep-alive packets that the router should wait before considering that the
connection may be lost.
Transmit Interval s seconds
The interval between transmission of keep-alive packets.
Assume connection is lost after n timeouts
Occasional packet loss is to be expected. This parameter allows for a specified number of lost
keep-alive packets before the connection is deemed to have failed.
Ethernet Settings
Receive Interval s seconds
The time between keep-alive packets that the router should wait before considering that the
connection may be lost.
Transmit Interval s seconds
The interval between transmission of keep-alive packets.
Assume connection is lost after n timeouts
Occasional packet loss is to be expected. This parameter allows for a specified number of lost
keep-alive packets before the connection is deemed to have failed.
To Next Page
Loading...
