Digi TransPort WR31 - Ikev2 Parameters

Configure Virtual Private Networking (VPN) IPsec parameters
Digi TransPort WR Routers User Guide 448
IKEv2 parameters
When IKE Version 2 is supported, it is possible to specify whether to use IKEv1 or IKEv2 protocol to
negotiate IKE SAs. The default is to use IKEv1. Routers the have been upgraded to support IKEv2 do
not require any changes to their configuration to continue working with IKEv1.
Use the following settings for negotiation
The settings for the IKEv2 negotiation.
Encryption
The encryption algorithm. The options are:
• None
• DES
• 3DES
• AES (128 bit keys)
• AES (192 bit keys)
• AES (256 bit keys)
Authentication
The authentication algorithm. The options are:
• None
• MD5
• SHA1
• SHA256
PRF Algorithm
The PRF (Pseudo Random Function) algorithm. The options are:
• MD5
• SHA1