Configure IP routing and forwarding IP Routing parameters
Digi TransPort WR Routers User Guide 366
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
ip 0 cidr on,off Enable CIDR routing
ip 0 admin_connected 0-2147483647 Connected Interfaces
ip 0 admin_static 0-2147483647 Static Routes
ip 0 admin_ebgp 0-2147483647 eBGP Routes
ip 0 admin_ospf 0-2147483647 OSPF Routes
ip 0 admin_rip 0-2147483647 RIP Routes
ip 0 admin_ibgp 0-2147483647 iBGP Routes
ip 0 inf_metric 0-2147483647 Maximum static route metric
ip 0 route_dbcast 0-255 Route directed IP broadcasts
ip 0 route_dly 0-2147483647 Wait s seconds before using an alternative
route
ip 0 route_dwn 0-2147483647 If an interface is configured for “dial on
demand” and fails to connect, Mark a
static route as Out Of Service for s
seconds
ip 0 routeup_dly 0-2147483647 When an Always On route becomes In
Service, wait s seconds before using it
To Next Page
Loading...
