Digi TransPort WR31 - Display Analyser Trace

Manage networks and connections Use the Analyser
Digi TransPort WR Routers User Guide 799
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
ana 0 anon on, off Enable Analyser
ana 0 maxdata 16-2000 Maximum packet capture size
ana 0 logsize 3 -180 Log Size
ana 0 l1on on, off Protocol Layers / Layer 1
ana 0 l2on on, off Protocol Layers / Layer 2
ana 0 l3on on, off Protocol Layers / Layer 3
ana 0 xoton on, off Protocol Layers / XOT
ana 0 ikeon on, off Enable IKE debug
ana 0 qmion on, off Enable QMI trace
ana 0 snaipon on, off Enable SNAIP trace
ana 0 lapdon 0-7
See below
ISDN Sources
ana 0 lapbon 0-7
See below
LAPB Links
ana 0 asyon Bitmap
See below
Serial Interfaces
ana 0 syon Bitmap
See below
Raw SYNC Sources
ana 0 discardson on, off IP Options / Trace discarded packets
ana 0 loopon on, off IP Options / Trace loopback packets
ana 0 ipfilt Comma-
separated list
IP Packet Filters / TCP/UDP Ports
ana 0 ipprotfilt Comma-
separated list
IP Packet Filters / IP Protocols
ana 0 ipaddfilt Comma-
separated list
IP Packet Filters / IP Addresses
ana 0 discportfilt Comma-
separated list
Discarded IP Packet Filters / TCP/UDP Ports
ana 0 discprotofilt Comma-
separated list
Discarded IP Packet Filters / IP Protocols
ana 0 discipaddfilt Comma-
separated list
Discarded IP Packet Filters / IP Addresses