Digi TransPort WR31 - User Security Settings

Configure Remote Management SNMP parameters
Digi TransPort WR Routers User Guide 678
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
snmptrap n IPaddr Valid IP address
such as 1.2.3.4
Trap Server IP Address a.b.c.d
snmptrap n port 0-65535 Port
Default=162
snmptrap n version v1, v2c, v3 Use SNMP Version
snmptrap n sendInforms on | off Send “Inform Request” messages
snmptrap n informto Integer If no response, retransmit the Inform Request
message after n seconds
snmptrap n informretries Integer Retransmit a maximum n times
snmptrap n community String Community
snmptrap n engineid String Trap Server Engine ID
snmptrap n securityname String SNMP User
snmptrap n securitylevel noauthnopriv
authnopriv
authpriv
User Security Level
noauthnopriv=No Authentication, No Privacy
authnopriv=Authentication, No Privacy
authpriv=Authentication and Privacy