Device administration Reboot the router
Digi TransPort WR Routers User Guide 843
Reboot the router
To reboot the router immediately or at a scheduled time, select Administration > Reboot.
The router performs a reboot after any FLASH write operations are completed. Also, one second
each is allowed for the following operations to be completed before reboot will occur:
▪ IPSec SA delete notifications are created and sent
▪ TCP sockets are closed
▪ PPP interfaces are disconnected
Immediately
Causes the router to reboot after a few seconds. The router cleanly terminates any TCP and VPN
connections before rebooting.
In h hrs m mins s secs
Schedules a reboot to occur after the configured period of time. To cancel a scheduled reboot,
enter the reboot cancel command from the command line.
Reboot button
Reboots the router or sets the scheduled reboot to occur.
Related CLI commands
Command Options Equivalent web parameter
reboot n/a Immediately
reboot 0-86400 In h hrs m mins s secs.
This CLI value is entered in minutes only.
reboot cancel Cancel reboot
To Next Page
Loading...
