Configure alarms Event Logcodes parameters
Digi TransPort WR Routers User Guide 637
Configure reasons
To configure handling of the reasons for a particular event, click the links in the Event Logcodes
Reasons column; for example, the Reboot command for the Power-up[%c] event. A page for
configuring the reason appears.
This page is similar to the Event Logcodes page for an event, but with the following difference:
there is no Do not log this event checkbox. There is the following additional parameter:
Inherit alarm priority from event
Causes the following Alarm Priority parameter to be disabled, and causes the priority to be the
same as the event that triggered it. The Alarm Priority parameter is the same as in the
Configuring Events page.
Related CLI commands
There are no CLI commands for editing Event logcodes. However, you can edit the LOGCODES.TXT
file which holds all the logcode information. For details on how to do this, see View and manage the
event log.
Entity Instance Parameter Values Equivalent web parameter
event n ev_filter Comma-separated list
of event codes
Do not log this event
To Next Page
Loading...
