Digi TransPort WR31 - FTP Relay n Parameters

Configure FTP Relay FTP Relay n parameters
Digi TransPort WR Routers User Guide 491
FTP Relay n parameters
There are two FTP Relay Agents available, with a separate web page for each. For command line
configuration, the instance number can be 0 or 1.
Relay files for user locuser to FTP Server ftphost
The value in the left-hand text box is the name of the local user and should be one of the
usernames assigned in the Configuration > Security > Users web page. This name then serves
as the FTP login username when the local device needs to relay a file. The value in the right-hand
text box is the name of the FTP host to which the files from the locally attached device are
relayed.
Server Username
The username required to log in to the specified FTP host.
Server Password
The password to use to log in to the host.
Confirm Server Password
The password should be retyped into this text box in order to confirm that it has been entered
correctly, given that it is not echoed in clear text.