Digi TransPort WR31 - View and Manage the Event Log

Manage networks and connections View and manage the event log
Digi TransPort WR Routers User Guide 795
View and manage the event log
The Management > Event Log page displays the current contents of the event log on the router.
The event log is stored in a pseudo-file named eventlog.txt. It acts as a circular buffer, so when
there is no space available for new entries, the oldest entries are overwritten.
Each entry in the log normally consists of a single line containing the date, time and a brief
description of the event. In some case it may also identify:
▪ The type/number of the protocol instance the generated the message, such as PPP 0.
▪ A reason code.
▪ Additional information such as an X.25 address or ISDN telephone number.
The specific events that generate a log entry are pre-defined and cannot be altered although the
text and priority of each event can be modified. This can be done via the
Configuration > Alarms > Event Logcodes page.
Related CLI commands
Command Options Action
type eventlog.txt None Displays the contents of the event log.
clear_ev None Clears the contents of the event log.