Configure network interfaces Configure Wi-Fi interfaces
Digi TransPort WR Routers User Guide 171
Configure Wi-Fi interfaces
The Configuration > Network > Interfaces > Wi-Fi section of the web interface that contains the
configuration options required in order to configure and enable the Wi-Fi features.
Global Wi-Fi settings
Because of national restrictions on the channels available for use, the correct country should be
selected from the drop down list to restrict the channels that are legal to use by the router. If
required, a specific channel can be selected to override the auto selection. The Antenna setting is
not available on some but not all TransPort WR routers.
Country
Selecting a country from the drop down list restricts the channels that the router will use. See
Restricting Wi-Fi channels by country for more info on licensed channels.
Network Mode
Select your chosen mode of operation from the drop down list. The available options vary by
router, and some operation modes may not be available on some models.
Channel
Selecting Auto allows the router to scan for a free channel within the range of legal channels for
the selected country. It is possible to manually select a specific channel to use, but make sure
the selected channel is legal to use in the country.
To Next Page
Loading...
