Configure alarms Event Logcodes parameters
Digi TransPort WR Routers User Guide 632
Event Logcodes parameters
On the Event Logcodes page, you can edit the logcodes that describe events entered in the
EVENTLOG.TXT file. If a change is made to the logcodes.txt file, the changes are saved in the file
logcodes.d, so that when a firmware upgrade is performed, the changes to the logcodes are
retained.
The Event Logcodes page initially shows a table containing the event descriptions and reason.
Clicking on any of the items that are links in the table opens a configuration page associated with
that item. The newly-opened page allows that item to be configured. The configuration options
shown on that page are described below.
Event
This is not a configurable parameter; it is simply the event number, displayed for information
only. This is the number to refer to when filtering events in the event log settings Configuration
> Alarms > Event Settings.
To Next Page
Loading...
