Digi TransPort WR31 - System Security Settings

Configure Remote Management SNMP parameters
Digi TransPort WR Routers User Guide 677
SNMPv1 / SNMPv2c settings
Community
Enter the desired community string into this text entry box.
Confirm Community
Reenter the community string again to verify it.
Trap Server Engine ID
This item is configured within the application. It is the SNMP server software engine ID for
authentication and encryption.
SNMP User
The username that should be associated with the trap server. This should match a user from one
of the previously configured SNMP users (Configuration > Remote Management > SNMP >
Users).
User Security Level
Select the desired security level from this drop-down selection box. The choices are these:
• No Authentication, No Privacy
• Authentication, No Privacy
• Authentication, Privacy
SNMPv3 settings
Username
The SNMPv3 user name.
Authentication
SNMPv3 authentication type.
Authentication Password
SNMPv3 authentication password. The password is stored in encrypted form.Encryption
SNMPv3 privacy password. The password is stored in encrypted form.
Confirm Encryption Password
Reenter the SNMPv3 privacy password to verify it.