Device administration Reset the router to factory defaults
Digi TransPort WR Routers User Guide 839
Reset the router to factory defaults
The Administration > Factory Default Settings page resets the router’s configuration back to the
factory defaults. You must reboot the router before the configuration changes take effect.
Keep network settings
Preserves certain network settings and does not revert them back to the factory defaults.
Network settings that are preserved are:
• Ethernet 0 IP address
• Ethernet 0 Mask
• Ethernet 0 Gateway
• Ethernet 0 DHCP Client
• Ethernet 0 DNS Server
• Default Route 0 Interface
• PPP 1 Username
• PPP 1 Password
• PPP 3 Username
• PPP 3 Password
• Mobile APN
• Mobile SIM PIN
Restore
Initiates a factory reset of the router.
To Next Page
Loading...
