Device administration Save configuration settings to a file
Digi TransPort WR Routers User Guide 842
Save configuration settings to a file
Once you have configured the router, save your chosen settings to non-volatile memory to avoid
losing them when the power is removed.
Save current configuration to Config n
Sets the configuration file to which the current configuration will be saved when the Save
button is clicked. There are two options: profile 0 and profile 1. The configuration profile in use
when the router powers up is indicated in the selection box. The default power-up profile is
profile 0.
Save All button
The Save All button saves the router’s entire configuration. This operation
• Saves the current configuration parameters to the file config.da0 or config.da1. The default
power up profile is profile 0. *.da0=profile 0, *.da1=profile 1.
• Saves the ciphered versions of the passwords to the file pwds.da0 or pwds.da1 file**.
• Saves the firewall configuration to the file fw.txt.
• Saves the serial port configuration to profile 0 of the sregs.dat.
• Saves the PAD parameters on all the PADs to profile 0 of the file x3prof.
Related CLI commands
Parameter Options Equivalent web parameter
config save Save current configuration to Config n
saveall n/a Save all configuration
To Next Page
Loading...
