Hardware TransPort WR21 hardware
Digi TransPort WR Routers User Guide 36
7 USB host connector: Connects compatible USB 2.0 client devices such as memory sticks, and
serial adapters. The total current available to power USB devices is 0.5A.
Reset the TransPort WR21
1 Turn the router on and wait 15 seconds for the router to complete its initialization process.
2 Press and hold the reset button gently for 5 seconds. After this time, the router automatically
reboots and display a pattern of alternating LEDs flashing followed by the normal boot
sequence.
CAUTION! Do not remove power from the router during this operation, as corruption of the flash
memory may occur.
To Next Page
Loading...
