Digi TransPort WR31 - PPP Sub-Configs Parameters

Configure network interfaces Configure Advanced interfaces settings: External modems and PPP
Digi TransPort WR Routers User Guide 331
PPP Sub-Configs parameters
Using PPP sub-configs is an alternative to using an entire PPP instance if only a few parameters are
different to those in an existing PPP instance. Using PPP sub-configs, you can define up to 50 sub-
configs and save them in system memory.
To configure the PPP Sub-Configs parameters, set the following values:
Nb
The instance number for a sub-config.
Description
The name to easily identify the sub-config.
Username
The username for authenticating with the remote system. Usually required for outgoing PPP
calls only.
Password
The password for authentication with the remote system.
Confirm
When changing the password, enter it into this text box also to allow the router to check for
simple typing errors.
Dialout Number
The ISDN number to make outgoing calls. This must be a valid number in order to allow the
router to make outgoing calls. This number could be the number of the Internet Service Provider
(ISP) or another router.
Add button
Adds the PPP sub-config to the PPP configuration.