Digi TransPort WR31 - Page 212

Configure network interfaces Configure mobile (cellular) interfaces
Digi TransPort WR Routers User Guide 212
Related CLI commands-SIM Slot 1 (PPP 1)
Entity Instance Parameter Values Equivalent web parameter
modemcc 0 sms_interval Poll for incoming SMS messages:-
Every n minutes
modemcc 0 sms_replies on/off Enable command replies via SMS
modemcc 0 sms_concat Number
0=off
10=default when
enabled
Concatenate replies
modemcc 0 sca Free text field Use this SMS message centre
number n instead of the network
default
modemcc 0 sms_access 0=Super (default)
1=High
2=Medium
3=Low
4=None
5=HighLow
6=HighMedium
7=CheckPar
SMS access level:
modemcc 0 sms_cmd_sep Free text field Use as a command separator
(default is CR)
modemcc 0 sms_callerid Mobile telephone
number
Allow CLI commands from the
following SMS numbers.
(First SMS number)
modemcc 0 sms_callerid_1 to
9
Mobile telephone
number
Allow CLI commands from the
following SMS numbers.
(additional SMS numbers 1 to 9)