Configure network interfaces Configure DSL interfaces
Digi TransPort WR Routers User Guide 224
Related CLI commands
Additional CLI commands
The following command is not available from the web interface:
adsl 0 debug {0|1}
Where 0 is off and 1 causes debugging information to be sent to the CLI.
Entity Instance Parameter Values Equivalent web parameter
adsl 0 oper_mode Multi,ANSI,G.dmt,G.lite,ADS
L2, ADSL2+
Operational mode
adsl 0 usefwfile on, off Load DSL firmware from flash file
adsl 0 watchdog on, off Enable watchdog
apvc 0 oammanage on, off Manage this PVC using ATM OAM
cells
To Next Page
Loading...
