Configure network interfaces Configure serial interfaces
Digi TransPort WR Routers User Guide 272
Enable echo on this interface
When enabled, enables command echo when using the command line interpreter. Disable this
setting if the attached terminal provides local echo.
CLI result codes
The required level of verbosity for command result codes. The available options are:
• Verbose
• Numeric
• None
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
asy n/a descr Free text-
description of
interface
Description
S31=n n/a n/a Where n=
3=115200
4=57600
5=38400
6=19200
7=9600
8=4800
Baud rate
S23=n n/a n/a Where n=
0=None
1=Odd
2=Even
5=8 Data Odd
6=8 Data Even
Default 0
Data Bits / Parity
&Kn n/a n/a Where n =
0=None
1=Hardware
2=Software
3=Both
Flow Control
To Next Page
Loading...
