Configure network interfaces Configure serial interfaces
Digi TransPort WR Routers User Guide 277
Profiles
Each serial port can have two profiles which can be configured differently. Which profile is in force
when the router powers-up is selected here.
Use profile n at power-up
Select 0 from the drop-down selection box to choose profile 0 to be active when the router
powers-up. Select 1 from the selection box to make profile 1 the active profile.
Load Config from Profile n
Select 0 from the drop-down selection box and click the button to load profile 0.
Apply & Save Changes to Profile n
Select 0 from the drop-down selection box and click the button to apply configuration changes
and save profile 0 after making any changes.
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
&Yn Where n =0, 1 Use profile n at power-up
&Zn Where n =0, 1 Load Config from Profile n
&Wn Where n =0, 1 Apply & Save Changes to Profile n
To Next Page
Loading...
