Digi TransPort WR31 - Page 412

Configure Virtual Private Networking (VPN) IPsec parameters
Digi TransPort WR Routers User Guide 412
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
eroute n descr String Description
eroute n peerip IP address or
hostname
The IP address or hostname of the remote unit.
eroute n bakpeerip IP address or
hostname
Use n as a backup unit.
eroute n locip IP address IP Address (for Local LAN)
eroute n locmsk IP Mask IP Mask (for Local LAN)
eroute n locipifent blank, ETH, PPP Use interface x,y
x=Interface type
eroute n locipifadd Integer Use interface x,y
y=interface number
eroute n remip IP address IP Address (for Remote LAN).
eroute n remmsk IP Mask IP Mask (for Remote LAN).
eroute n remnetid String Remote Subnet ID.
eroute n authmeth Off, Preshared,
xauthinitpre, rsa,
xauthinitrsa
Use the following security on this tunnel.
eroute n ourid String Our ID.
eroute n ouridtype 0=IKE ID
1=FQDN
2=User FQDN
3=IPv4 Address
Our ID type.
eroute n peerid String Remote ID.
eroute n privkey Filename RSA Key File.
eroute n espenc off, null, des, 3des,
aes
Use enc encryption on this tunnel.
eroute n enckeybits 128, 192, 256 Use enc encryption on this tunnel.
eroute n espauth off, md5, sha1 Use auth authentication on this tunnel.
eroute n dhgroup 0, 1, 2, 3 Use Diffie Hellman group.
eroute n ikever 1, 2 Use IKE n to negotiate this tunnel.
eroute n ikecfg 0, 1 Use IKE configuration.