Digi TransPort WR31 - Page 482

Configure Secure Shell (SSH) server and client Configure Secure Shell (SSH) server parameters
Digi TransPort WR Routers User Guide 482
Related CLI Commands
Entity Instance Parameter Values Equivalent web parameter
ssh 0-7 port 0-65535 Use TCP port p
ssh 0-7 nb_listen 0-2147483647 Allow up to n connections
ssh 0-7 hostkey1 Up to 12 characters (8.3
format)
Host Key 1 Filename
ssh 0-7 hostkey2 Up to 12 characters (8.3
format)
Host Key 2 Filename
ssh 0-7 loginsecs 0-2147483647 Maximum login time s seconds
ssh 0-7 logintries 0-2147483647 Maximum login attempts n
ssh 0-7 comp 0=disabled Use Deflate compression, level
ssh 0-7 fwd 0-2147483647 Enable port forwarding
ssh 0-7 cmdhost Valid IP address a.b.c.d Command session IP address a.b.c.d
ssh 0-7 cmdport 0-2147483647 Command session port p
ssh 0-7 svrkeybits 0-2147483647 Server key size
ssh 0-7 initkex off, on Actively start key exchange
ssh 0-7 rekeybytes 0-2147483647
0=Do not rekey
Rekey After n units of data have been
transferred
ssh 0-7 enc3descbc 0-2147483647
0=Disabled
3DES
ssh 0-7 encaes128cbc 0-2147483647 AES (128 bits)
ssh 0-7 encaes192cbc 0-2147483647 AES (192 bits)
ssh 0-7 encaes256cbc 0-2147483647 AES (256 bits)
ssh 0-7 macmd5 0-2147483647 MAC MD5
ssh 0-7 macmd596 0-2147483647 MAC MD5-96
ssh 0-7 macsha1 0-2147483647 MAC SHA1
ssh 0-7 macsha196 0-2147483647 MAC SHA1-96
ssh 0-7 debug 0, 1
0=Off
1=On
Enable Debug