Digi TransPort WR31 - Page 552

Configure legacy protocols Configure X.25 parameters
Digi TransPort WR Routers User Guide 552
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
X25gen 0 lapd_cnf_addr 1=enabled
0=disabled
When answering a X.25 call, use the addresses
from CALL packet in the CALL CNF packet.
LAPD setting
X25gen 0 lapd_cnf_addr 1=enabled
0=disabled
When answering a X.25 call, use the addresses
from CALL packet in the CALL CNF packet
LAPB setting
X25gen 0 xot_cnf_addr 1=enabled
0=disabled
When answering a X.25 call, use the addresses
from CALL packet in the CALL CNF packet
XoT setting
X25gen 0 reset_xotpvc_ini 1=enabled
0=disabled
Reset XOT PVC if the router is the Initiator
X25gen 0 reset_xotpvc_resp 1=enabled
0=disabled
Reset XOT PVC if the router is the Responder
X25gen 0 en_incl_iphdr 1=enabled
0=disabled
Include length of header in IP length header