Configure legacy protocols Configure X.25 parameters
Digi TransPort WR Routers User Guide 574
4 Idle timer delay
Defines a time-out period after which data received from the DTE is assembled into a packet and
forwarded to the network. If the forwarding time-out is disabled, one or more characters should
be selected as data forwarding characters using parameter 3.
5 Ancillary device control
Determines method of flow control the PAD uses to temporarily halt and restart the flow of data
from the DTE during a call.
6 Suppression of PAD service signals
Determines whether or not the PAD> prompt and/or Service/Command signals are issued to
the DTE.
Option Description
0 No data forwarding time-out
1 Data forwarding time-out in 20ths of a second.
Option Description
0No flow control
1 XON/XOFF flow control
3 RTS/CTS flow control (not a standard X.3 parameter)
Option Description
0 PAD prompt and signals disabled
1 PAD prompt disabled, signals enabled
4 PAD prompt enabled, signals disabled
5 PAD prompt enabled, signals disabled
To Next Page
Loading...
