Configure Remote Management SNMP parameters
Digi TransPort WR Routers User Guide 673
Authentication None, MD5, SHA1, SHA256
These three radio buttons select what authentication algorithm is to be applied to the SNMP
transactions.
Authentication Password
The authentication password for the user.
Confirm Authentication Password
The authentication password is not shown as clear text. The confirmation box allows a simple
check that the password has been entered correctly.
Encryption None, DES, AES
These three radio buttons select which encryption (privacy) algorithm should be applied to the
SNMP data.
Encryption Password
Enter the user’s password for controlling privacy of the SNMP transactions into this text box.
Confirm Encryption Password
The encryption password is not shown as clear text. The confirmation box allows a simple check
that the password was entered correctly.
Related CLI commands
Entity Instance Parameter Values Equivalent web parameter
snmpuser n community public / private Community
snmpuser n name user_name Username
snmpuser n auth Off,MD5,SHA1 Authentication, None, MD5, SHA1
snmpuser n authPassword my_password Authentication Password
snmpuser n priv Off,DES,AES Encryption, None, DES, AES
snmpuser n privPassword my_password Encryption Password
To Next Page
Loading...
