Configure security settings Firewall
Digi TransPort WR Routers User Guide 691
Firewall script rule fields
Firewall script rule fields are as follows:
[action]
The action to be performed. Acceptable values are block, pass, pass-ifup, dscp, vdscp, or
debug. These actions operate as follows:
block
Prevents a packet from being allowed through the firewall. When block is specified, an optional
field can be included that causes an ICMP packet to be returned to the interface from which that
packet was received. You can use blocking to confuse hackers by having different responses to
different packets or for fooling an attacker into thinking a service is not present on a network.
The syntax for specifying the return of an ICMP packet is:
“return-icmp” [icmp-type [icmp-code]]
where [icmp_type] is a decimal number representing the ICMP type, or one of the predefined
text codes listed in the following table:
ICMP type value ICMP type
1Unreach
2Echo
3Echorep
4squench
5redir
6timex
7 paraprob
8timest
9timestrap
10 inforeq
11 inforep
12 maskreg
13 maskrep
14 routerad
15 routersol
To Next Page
Loading...
