Configure security settings TACACS+ parameters
Digi TransPort WR Routers User Guide 724
Server Key
The encryption key to use when communicating with the secondary server.
Confirm Server Key
Enter the key into this text box to allow the router to confirm that the two entries are identical.
Enable local authentication if there is no response from the server(s)
Allows local authentication if TACACS+ authentication fails.
Enable TACACS+ Authentication
Enables authentication. When authentication is enabled, user authentication takes place on the
TACACS+ server. When disabled, user authentication takes place locally on the router.
Enable TACACS+ Authorisation
Enables authorization which means that authorization of the application takes place and
authorization of application-related commands also takes place.
Enable TACACS+ Accounting
Enables accounting. Sends accounting messages at the start and end of application sessions,
where applicable, and update messages from command sessions when commands are denied
locally or after they are executed.
Related CLI Commands
Entity Instance Parameter Values Equivalent web parameter
tacplus 0 svr Up to 64 characters for hostname
or valid IP address a.b.c.d
Hostname or IP address of server
tacplus 0 port 0-2147483647
Default 49
Port
tacplus 0 key Up to 20 characters Server Key
tacplus 0 svr2 Up to 64 characters or valid IP
address a.b.c.d
Hostname or IP address of server
tacplus 0 key2 Up to 20 characters Server Key
tacplus 0 localauth off, on Enable local authentication if there
is no response from the server(s)
tacplus 0 authent off, on Enable TACACS+ Authentication
tacplus 0 author off, on Enable TACACS+ Authorization
tacplus 0 acct off, on Enable TACACS+ Accounting
tacplus 0 debug off, on n/a
tacplus 0 tacacspageauth off, on n/a
To Next Page
Loading...
