Digi TransPort WR31 - Page 734

Configure security settings Command filters
Digi TransPort WR Routers User Guide 729
Examples
To display an entry in the calling numbers list enter the command:
rejlst <instance> ?
where
<instance> is 0-9. For example:
rejlst 5 ?
To set up an entry to reject a number, use the following commands:
rejlst 0 num 1234567
rejlst 0 ans OFF
rejlst 0 code 42
To set up an entry to answer a number, use the following commands:
rejlst 1 num 1234567
rejlst 1 ans ON