Configure telemetry settings GPS parameters
Digi TransPort WR Routers User Guide 736
The following CLI parameters are not available on the web interface:
gps 0 nsecs1 Time s seconds every n interval(s)
gps 0 udpmode1 0, 1
0=TCP
1=UDP
Use TCP/UDP
gps 0 IPprefix1 Free text Prefix the message with
gps 0 IPsuffix1 Free text Suffix the message with
gps 0 IPaddr2 Valid IP address a.b.c.d Send GPS message to IP address (2)
gps 0 IPport2 Valid IP port n port n
gps 0 nsecs2 Time s seconds every n interval(s)
gps 0 udpmode2 0, 1
0=TCP
1=UDP
Use TCP/UDP
gps 0 IPprefix2 Free text Prefix the message with
gps 0 IPsuffix2 Free text Suffix the message with
Entity Instance Parameter Values Equivalent web parameter
Entity Instance Parameter Values Equivalent web parameter
gps 0 gga_int s seconds 0–255 n/a
gps 0 gll_int s seconds 0-255 n/a
gps 0 gsa_int s seconds 0-255 n/a
gps 0 gsv_int s seconds 0-255 n/a
gps 0 rmc_int s seconds 0-255 n/a
gps 0 vtg_int s seconds 0-255 n/a
gps 0 zda_int s seconds 0-255 n/a
To Next Page
Loading...
