Digi TransPort WR31 - Page 808

Manage networks and connections Use the Analyser
Digi TransPort WR Routers User Guide 803
To enable the Analyser on multiple serial interfaces, add the appropriate values together. For
example, to enable the Analyser on serial interfaces 2 and 3, the value should be 12 (4+8).
The number of serial interfaces can vary on different depending on which hardware and software
options are available.
Raw Sync Interfaces
To enable the Analyser on multiple serial interfaces, add the appropriate values together. For
example, to enable the Analyser on Physical Ports 0 and 1, the value should 24 (8+16).
Interface Value
ISDN D 1
ISDN B1 2
ISDN B2 4
Physical Port 0 8
Physical Port 1 16