Device administration Manage files
Digi TransPort WR Routers User Guide 816
Sub-directories are not supported. Depending on the router mode, you can store a maximum of 80-
300 files including system files, providing there is sufficient memory remaining.
You can upload new files into the router from a local terminal or from a remote system over the WAN
connection. Existing files can be renamed or deleted using DOS-like commands.
Although the file system will only store a limited number of files, all those files associated with the
web interface are stored in a single file with the .web extension and extracted as required.
Action
Selects each read/write file for deletion.
File
The name of the file in the flash file system.
Size (bytes)
The size of the file, in bytes. This is not a fixed value. When downloaded, the size of the
downloaded file will be different.
Access
This is the access settings for the file.
Last Modified
The date and time of when the file was last modified.
Delete Selected Files button
Deletes the selected files.
Related CLI commands
Setting Description
rw Read / Write access
ro Read Only access
Command Options Equivalent web parameter
dir Displays the entire contents of the router’s flash file system.
dir <filter> Displays a filtered view of the router’s flash file system. The
filter can contain wildcards using the *.
such as
dir *.pem
to display all the files ending in .pem.
dir u: Displays the contents of an USB flash stick if inserted into the
USB port of the router.
To Next Page
Loading...
