Trip A/B
① Average fuel consumption (L/100km): the
volume of fuel consumed per 100km in trip A/B.
② Average vehicle speed (km/h): the average
vehicle speed in trip A/B.
③ Mileage driven in trip A/B (km).
Trip A records the mileage driven since each
start, and is automatically reset after the
ENGINE START/STOP button is set to “OFF”
position.
Trip B records the mileage driven since last
resetting up to 9999.9km, and remains
unchanged after the maximum mileage is
reached. Press and hold the instrument cluster
page scrolling button on the right button
on the steering wheel for more than 1s to clear
the trip B manually.
Tire information (DDS)
Tire pressure status is displayed for four wheels.
When one or more of the four wheels have low
tire pressure, the corresponding wheels on the
instrument cluster will flash and “OK” in the
figure will change to “!” , and the tire pressure
fault warning lamp on the instrument
cluster will come on. See page for details.
Remaining distance to the next service
The maintenance information includes the
remaining distance to the next service.
Default maintenance mileage intervals are set as
follows:
5,000 km for the first time, 12,500 km for the
second time, and 7,500 km subsequently.
It is recommended that users do inspection
regularly and maintenance in time.
With the start-stop switch in the “ON” position,
the maintenance mileage, if not more than 500
km, will be displayed for 3 s (negative number
will be displayed if it is less than 0.) and the
wrench symbol will flash. 3 s later, the vehicle
status interface is displayed, and the wrench
symbol stays on. Please visit the authorized
dealer for maintenance in a timely manner.
To Next Page
Loading...