AEB fault warning lamp*
When the ENGINE START/STOP button is in
“ON” position, the AEB fault warning lamp will go
out after the self-test is completed (about 1s).
The lamp will go out after the engine is started.
This indicates that the AEB is normally activated.
If the AEB fault warning lamp is always on when
the engine/vehicle is running, it indicates that the
AEB is faulty. (See page 153 for details)
ACC fault warning lamp*(red)
This lamp will come on when the ACC is faulty.
If this lamp remains on after the engine is
restarted, contact an authorized dealer for
inspection and repair as soon as possible. (See
page 147 for details)
LKA fault warning lamp*(red)
This lamp will come on when the LKA is faulty. If
this fault indicator lamp remains on upon self-
learning of the system during driving for a period
of time after the engine is restarted, contact
Dongfeng Franchise Stores for inspection as
soon as possible. (See page 155 for details)
LDW fault warning lamp*(red)
This lamp will come on when the LDW is faulty.
If this fault indicator lamp remains on upon self-
learning of the system during driving for a period
of time after the engine is restarted, contact
Dongfeng Franchise Stores for inspection as
soon as possible. (See page 155 for details)
ICA fault warning lamp*(red)
This lamp will come on when the ICA is faulty. If
this fault indicator lamp remains on when the
engine is restarted, contact the authorized dealer
for inspection as soon as possible. (See page
162 for details)
/ TLC/ALC fault warning lamp*
When the TLC/ALC is faulty, the TLC/ALC fault
warning lamp (red) will come on; When the
corner radar sensor is faulty, the TLC/ALC fault
warning lamp (yellow) will come on. ● If this
fault indicator lamp remains on upon self-
learning of the system during driving for a period
of time after the engine is restarted, contact
Dongfeng Franchise Stores for inspection as
soon as possible.
ELK fault warning lamp*
This warning lamp will come on when the ELK is
faulty. ● If this fault indicator lamp remains on
upon self-learning of the system during driving
for a period of time after the engine is restarted,
contact Dongfeng Franchise Stores for
inspection as soon as possible.
ESA fault warning lamp*
When ESA is faulty, this warning lamp will come
on, and the instrument cluster will display “ESA
fault”. At this time, contact Dongfeng Franchise
Store for inspection as soon as possible.
READY indicator lamp*
When the shift lever is in the “P” or “N” position,
the brake pedal is depressed, and the ignition
switch or ENGINE ON/STOP button is set to the
“ON” position, the READY indicator lamp
lights up and a pleasant tone is heard, it
indicates the motor enters the READY mode at
this time.
To Next Page
Loading...