/ TLC ON indicator lamp*
When the TLC is in different working modes, the
corresponding indicator lamps on the instrument
cluster will come on:
On - the function is turned on but the lane
change conditions are not met;
On - the function is turned on and the lane
change conditions are met.
/ ALC ON indicator lamp*
When the ALC is in different working modes, the
corresponding indicator lamps on the instrument
cluster will come on:
On - the function is turned on but the lane
change conditions are not met;
On - the function is turned on and the lane
change conditions are met.
ELK ON indicator lamp*
This indicator lamp will come on when the ELK is
turned on and the system is free of fault or when
the activation conditions are met and the ELK is
turned on without inhibiting conditions.
JA ON indicator lamp*
When the JA is turned on and the system is free
of fault, the JA ON indicator lamp will go off
immediately after self-test.
When the JA is turned on and working and the
activation conditions are met, the JA ON
indicator lamp will flash.
When the JA is faulty, the JA ON indicator lamp
will stay on, and the instrument cluster will
display “JA fault”. At this time, contact the
Dongfeng Franchise Store for inspection.
/ ESA ON indicator lamp*
When the ESA is in different working modes, the
corresponding indicator lamps on the instrument
cluster will come on:
On - the system is ready;
On - the function is turned on and the
activation conditions are met;
Flash - the system is working.
Omni-
directional early warning assist indicator
lamp*
When the LCW, FCTA, RCTA and DOW are in
different modes, the corresponding indicator
lamps on the instrument cluster will come on:
On - any of LCW, RCTA and DOW is
turned on and FCTA is turned on, without fault;
On - only FCTA is turned on, without fault;
On - any of LCW, RCTA and DOW is
turned on and FCTA is not turned on, without
fault;
On - FCTA is faulty;
On - any of LCW, RCTA and DOW is
faulty.
On - FCTA is faulty; any of LCW, RCTA
and DOW is faulty.
To Next Page
Loading...