Driving mode
In addition to the normal mode, there
are also ECO mode , sport mode
and intelligent mode to
choose from. You can switch between these
driving modes by rotating the mode knob on the
console.
Normal mode
It is applicable to gentle driving.
After the vehicle is started, the normal driving
mode will be enabled by default.
The smoother torque output is guaranteed in the
normal mode.
ECO mode
It is applicable to ECO driving.
Rotate the driving mode knob to enter the ECO
mode. The indicator lamp on the
instrument cluster will come on.
The economy of the vehicle is first guaranteed in
the ECO mode.
Sport mode
It is applicable to race.
Rotate the driving mode knob to enter the sport
mode. The indicator lamp on the
instrument cluster will come on.
The power and acceleration performances are
first guaranteed in the sport mode.
Intelligent mode
Rotate the driving mode knob to enter the sport
mode. The indicator lamp on the
instrument cluster will come on.
After entering the intelligent mode, the system
will know the current driving situation, which can
ensure the power and economy of the vehicle.
Drive mode MEM function setting
The Drive mode MEM function can be turned on
or off through “CarCenter” – “Convenient” -
“Drive mode MEM” in MP5 display. When the
function is set ON, the system will memorize the
driving mode before the ENGINE START/STOP
button is set OFF, and when the vehicle is
started again, it will run in the memorized driving
mode.
Function fault reminder
If the gear position displayed on the instrument
cluster flashes when the engine START/STOP
button is set to “ON” position or the vehicle is
traveling, it indicates that the powertrain or other
systems (engine, ABS/ESC, etc.) may
malfunction. In this case, pull over safely and
contact the authorized dealer for inspection
immediately.
To Next Page
Loading...